STARDOM IDE RAID Solution
13
will suppose that the SR3500 has a smaller capacity.
Ÿ
Installing an old HDD and a new one
If installing an old HDD with a new one, please purchase the same
brand and choose a disk capacity greater than or equal to the
original one. SR3500 will automatically format a new HDD. The
Auto-Rebuild
Function will copy data to the new target HDD at
RAID 1.
1. Install
the original HDD into either the primary or the
secondary bay of SR3500.
2. In the event of no HDD inside, SR3500’s buzzer begins to
sound after computer is started. To switch off the alarm, use a
sharp pointed object to turn off the buzzer on the front panel.
The Access LED under the LCD screen will be on. (Note 1)
3. After SR3500 ready, insert the Removable Carrier with the new
HDD into the empty bay of the SR3500. The capacity of the
new HDD should be equal to or greater than the original one.
4. Wait a few seconds, after which the SR3500 will automatically
perform the
Auto-Rebuild
function. (Refer to Chapter 4
Automatic Rebuild Function).
5. After the
Auto-Rebuild
, use a sharp pointed object to turn on
the buzzer on the front panel. The alarm LED will be off. (Note
2)
