3.1.4 Power
Supply
(1) Receptacle
(5) Ejector
(2) POWER GOOD LED
(4) FAN FAULT LED
(6) Power cable clamp
(3) POWER FAULT LED
(1) Receptacle
Connect the power cable that comes with the disk array unit to the receptacle to supply AC
power.
(2) POWER GOOD LED (green)
The LED illuminates to indicate that AC power is being supplied to the unit.
(3) POWER FAULT LED (orange)
The POWER FAULT LED illuminates to indicate that the power supply (excluding the fan)
is faulted.
Blinking indicates a temperature abnormality inside the power supply or that a controller has
not been installed in the housing.
This LED is effective when AC power is being supplied to either PS0 or PS1.
(4) FAN FAULT LED (orange)
The FAN FAULT LED illuminates to indicate that the fan is faulted.
The power supply FAN operates when AC power is being supplied to either PS0 or PS1.
This LED is effective when AC power is being supplied to either PS0 or PS1.
(5) Ejector
The ejector is used in installing or removing the power supply.
(6) Power cable clamp
The power cable clamp is a mechanism that prevents the power cable from being
disconnected unintentionally.
-
12
-
Содержание Xanadu
