RAID Xanadu, Руководство пользователя

Страница: 181 / 189

Appendix A. Notes on Using MSCS (Microsoft
Cluster Service) in a Windows Server
2003 Environment and on
Connecting FC Switches in a Fault
Tolerant Server Environment
[Notes on using MSCS (Microsoft Cluster Service) in a Windows Server 2003
environment]
When you use MSCS in a Windows Server 2003 environment, according to MSCS specifications,
Target ID and LUN (number) of the RAID Storage disk array that each server recognizes must be
set to the same values. A cluster cannot be set up if they are set to different values.
For details, refer to the URL below.
[KB331801] Cluster setup may not work when you add nodes.
http://support.microsoft.com/kb/331801/en-us
(1) Target ID
How to set the Target IDs of controllers of a disk array unit that are recognized by servers to
the same value is described below for each connection configuration.
Directly connecting disk array unit to server (HBA)
Set the Loop Switch IDs of disk array unit controllers to the same value.
The Switch ID that is set becomes the Target ID recognized by the server.
Also set
the Loop Switch IDs of all connected controller ports to the same
value
in the same way when the disk array unit is connected to the server by multiple
paths.
Server A
Cluster
Server B
Server A
SPS
HBA0 HBA1
Cluster
Server B
SPS
HBA0 HBA1
HBA0 HBA1
Set the
same
HBA0 HBA1
Set the same value.
10h 10h
10h
value.
10h 10h 10h
HF0
Basic
port
HF0
Basic
port
HF0 HF1
Basic
port
HF0 HF1
Basic
port
Controller 0 Controller 1
Controller 0
Controller 1
RAID Storage disk array
RAID Storage disk array
Single-path configuration
Dual-path configuration
SPS: PathManager
-
158
-