RAID Xanadu, Руководство пользователя

Страница: 107 / 189

(2) Disk array specification
Disk array specification specifies the disk array to be initialized.
Figure 11.1.3 Disk Array Specification Screen
The initialization wizard performs initialization for the one unit that is selected. If
multiple units are displayed, start the initialization wizard again to perform
initialization for another disk array.
Only disk arrays that are connected to the same network as the management
server can be retrieved.
To retrieve disk arrays, use the User Datagram Protocol (UDP) and use port
number “2730”. If a firewall has been installed, set it so that retrieval packets
for the management server and disk array network can pass through.
Once a disk array has undergone network setup in initialization, it cannot be
reinitialized by the initialization wizard.
Refer to 11.2
“Setup Modification” to
make individual settings.
-
84
-