Rae QRAE II, Руководство пользователя

Страница: 75 / 92

QRAE II
User’s Guide
Page 73
Programming Mode
Programming Mode can be entered from Normal Mode or Diagnostic Mode. This mode
contains most adjustable settings for the QRAE II. It is organized into five submenus:

Calibrate Monitor

Change Alarm Limits

Change Datalog

Change Monitor Setup

Change Sensor Configuration
The following diagram shows how to enter Programming Mode from Normal Mode and
from Diagnostic Mode:
Modify Span Gas Value.
This function allows selection of the gas concentration for
each sensor.
Setting the span value separately for each senso r.
1.
Select a sensor by pressing [MODE] until the sensor’s name is highlighted.
2. Press [MODE] to advance through the digits on each sensor.
3. Press [Y/+] to increase the number (0 to 9).
Note: Once the number reaches 9, pressing [Y/+] returns to 0 and starts counting
up again each time [Y/+] is pressed.
4. Press and hold [MODE] for 3 seconds and release to advance to the next sensor.