Rae QRAE II, Руководство пользователя

Страница: 59 / 92

QRAE II User Guide
Page 57
6. Install three AA alkaline batteries into the Alkaline Battery Adapter, making sure
the battery polarity is correct.
7. Place the Alkaline Battery Adapter into the compartment with its six gold-plated
contacts aligned over the six pins.
8. Place the cover over the compartment.
9. Tighten all three screws by turning them clockwise with the hex wrench.
10. The monitor automatically detects the alkaline batteries.
IMPORTANT!
Alkaline batteries cannot be recharged. The QRAE II’s internal circuit detects alkaline
batteries and will not allow recharging. If you place the QRAE II in its cradle, the
alkaline battery will not be recharged, and you will see this icon:
Note: When replacing alkaline batteries, dispose of old ones properly.
WARNING!
To reduce the risk of ignition of hazardous atmospheres, recharge the battery only in
areas known to be non-hazardous. Remove and replace the battery only in areas known to
be non-hazardous.
9.3
Charging A Spare QRAE II Li-Ion Battery
A QRAE II Li-ion battery can be charged when it is not inside the QRAE II. The
charging cradle is designed to accommodate both types of charging. Contacts on the
bottom of the QRAE II battery meet the contacts on the cradle, transferring power
without other connections, and two clips hold the battery in place during charging.
1. Plug the AC/DC adapter into the QRAE II’s cradle.
2. Place the battery into the cradle, with the six gold-plated contacts on top of the six
matching charging pins.
3. Plug the AC/DC adapter into the wall outlet.
The QRAE II battery begins charging automatically. During charging, the LED in the
cradle glows red. When charging is complete, it glows green.
Release the battery from the cradle by pressing the keys on both sides of the cradle and
lifting the battery out of its slot.
Note: If you need to replace the 3.7V Li-ion battery pack, replacements are available
from RAE Systems. The part number is 020-3402-000.