Rae microrae, Руководство пользователя

Страница: 52 / 64

MicroRAE User’s Guide
52
16.3. Navigating Diagnostic Mode
Step through Diagnostic Mode by pressing [MODE]. The first screen you see is information
about the product, including the serial number, firmware version, etc. Exit Diagnostic Mode at
any time by shutting the instrument off (hold [MODE] for the 5-second countdown).
• Instrument model name and ID number (in hexadecimal)
• Serial number
• Instrument firmware Version
• Firmware build date
• Firmware build time
• Sensors Installed
• Socket Raw Counts (for all installed sensors)
• Zero and Span raw counts for LEL sensor
• Zero and Span raw counts for O2 sensor
• Air and Span raw counts for O2 sensor
• Location 1 Zero and Span raw counts
• Location 2 Zero and Span raw counts
• LEL sensor ID and Gain (press [Y/+] to step through raw count and last calibration date
and time)
• O2 sensor ID and Gain (press [Y/+] to step through raw count and last calibration date
and time)
• Location 1ID and Gain (press [Y/+] to step through raw count and last calibration date
and time)
• Location 2 ID and Gain (press [Y/+] to step through raw count and last calibration date
and time)
• Buzzer Mode (press [Y/+] to change: 0 = silent, 1 through 7 indicates number of beeps
per second)
• Buzzer Frequency (press [Y/+] to change frequencies in 100 Hz increments)
•
Battery voltage (raw count; press [Y/+]to view SRAW and voltage)
• RTC (real-time clock) shows date and time
• Ambient light sensor threshold raw count (press [Y/+] to turn backlight on/off)
• Backlight and Vibrator (press [Y/+] to toggle; BKL1 = white backlight, BKL2 = red
backlight)
• Temperature raw count and Celsius reading
• Motion (shows X, Y, and Z position; press [Y/+] to change window, warning time, and
threshold value)
• Runtime
• LCD contrast (press [Y/+] to change)
• LCD Test (press [Y/+] to show entire display)
• BLE (Bluetooth Low Power) power on (on/off status, press [Y/+] for MAC address)
• GPS Power (if GPS is installed)
• WiFi (press [Y/+] to step through settings)
• GPS longitude and latitude (press[Y/+] to show status and number of satellites
• Mesh module firmware version and build date (press [Y/+] to show ID, PANID,
Press[Y/+] to continue to show PID and channel, and press [Y/+] again to show region
and radio type)
• Communication – Enter communication mode with computer (press [Y/+] to enter; press
[MODE] to exit)