MicroRAE User’s Guide
31
5.
Press [Y/+]. The Site ID is saved, and you see the confirmation message “User ID
Saved.” It automatically advances to “Exit.”
6.
Press [Y/+] to exit to “Set Radio.” To return to the Set Site ID, press [MODE].
9.3.4.3. Set Site ID
If your MicroRAE is to be used at a specific site, it can have a uniquely named Site ID (a name or
numbers or combination) to help identify it in ProRAE Guardian monitoring software. The Site
ID must be eight characters in length, with the first four characters alphanumeric (letters and
numerals) and the last four must be numerals.
1.
Press [MODE] to advance through the characters from left to right.
2.
Press [Y/+] to ] to advance through the letters and numbers.
3.
Press [MODE] to register your choice and advance to the next character.
4.
When you are satisfied with the Site ID, press [MODE] until “?” is selected.
5.
Press [Y/+]. The Site ID is saved, and you see the confirmation message “Site ID Saved.”
It automatically advances to “Set User ID.”
9.3.5. Set Radio
Depending on which (if any) radio type is installed in the MicroRAE, there are various settings
that can be changed.
Note:
BLE (Bluetooth Low Energy) is included in all MicroRAEs.
9.3.5.1. BLE On/Off
You can turn BLE in all configurations of MicroRAE, or turn WiFi or Mesh Roaming (depending
on how your instrument is configured) on or off via this set of submenus.
1.
From “Set Radio,” press [Y/+] to advance to BLE On/Off.
2.
Press [Y/+] to turn BLE on or off, or press [MODE] to advance to the next “Set Radio”
screen without changing the BLE on/off status.
9.3.5.2. WiFi On/Off
If your MicroRAE is equipped with WiFi wireless, you can turn it on or off:
Press [Y/+] to toggle WiFi on or off, or press [MODE] to advance to any other radio
type’s on/off screen without changing the WiFi on/off status.
9.3.5.3. Sent History
If your MicroRAE is equipped with WiFi wireless, you can view messages that have been sent
from the MicroRAE (messages must be created in ProRAE Studio II and loaded into the
MicroRAE):
Press [Y/+] to view sent messages. If none have been sent, then “No Msg” is shown.
9.3.5.4. Roaming On/Off
The Roaming function provides continuous wireless connectivity between zones, enabling users
of wireless monitors to travel from one zone/work area to another without losing communication
between their monitor and ProRAE Guardian. You can turn Roaming on and off in ProRAE
Studio II.
