RADWAG Y/KTP series, Руководство пользователя

Страница: 58 / 176

In order to enter submenu
< Inputs / Outputs>
, press
and then
:
„ Inputs / Outputs”
.
18.1. Configuration of inputs
Procedure:
•
Enter
< Inputs / Outputs>
according to ch. 18 of this manual,
•
Choose
< Inputs>
and enter the selected input you will see
a list of functions to ascribe,
•
Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Notice:
The list of functions to ascribe to inputs are described in APPENDIX B
of this manual. By default inputs have no ascribed functions <None>.
18.2. Configuration of outputs
Ascribing a function to the output enables the output at the same time.
If an output has no ascribed function it is disabled.
Procedure:
•
Enter
< Inputs / Outputs>
according to ch. 18 of this manual,
•
Choose
< Outputs>
and enter the required output, then you
will see the list of functions:
None
Output disabled
Stabile
Stable weighing result over LO threshold value
MIN stable
Stable weighing result below the MIN threshold
MIN non-stable
Non-stable weighing result below the MIN threshold
OK stable
Stable weighing result between MIN and MAX thresholds
58