RADWAG Y/KTP series, Руководство пользователя

Страница: 116 / 176

116
Notice:
Editing products in the assortment database is described in ch. 31.7.2
of this manual.
During the
„Non-destructive Empty-Full”
test the following data are
displayed:
Put empty 1 / 5
- Command concerning the weighing process and
a product number out of the charge quantity
P
- Number of performed measurements of full
packages and the sample quantity
NM
- Nominal weight of the tested product
X
- Average weight of the tested product
DX
- Boundary disqualifying average value
T1
- Number of errors within limit
T1
in the sample
2T1
- Number of errors within limit
2T1
in the sample
S
- Standard deviation
Wynik
- Test resilt: positive or negative
Towar
- Tested product name
After the test has been comleted the test is summarised (see ch. 30.4)
and the results are automatically saved in the database:
Notice:
A pattern and example of the report from estimating average tare are
described in ch. 30.8 of this manual.
30.6. Performing distructive testing in modes Empty-Full and Ful-Empty
The
„destructive control”
over the batch quantity equals 100 psc.
the sample quantity is constant and equals 20 pcs.
To start the control select a product with properties set to start destructive
control with the outlined
„charge”.
All the necessary information are
displayed accordingly during the test.
Notice:
1. Editing products in the assortment database is described in ch. 31.7.2
of this manual,