Rado A100, Инструкция по эксплуатации

Страница: 14 / 20

12
2.4 Other hydraulic functions
2.4.1 Flexible leveller - raising
Upon pressing, the key will highlight in yellow and the fl exible leveller will beging to rai-
se. Press it again and the key will highlight in green and the fl exible leveller raising stops.
2.4.2 Flexible leveller - lowering
Upon pressing, the key will highlight in yellow and the fl exible leveller will beging to
lower. Press it again and the key will highlight in green and the fl exible leveller lowering
stops.
2.4.3 Mulching section raising
Pressing this key will turn on the mulching sec on raising func on. To end the raising,
press the key again and the mulching sec on raising func on will turn o
ff .
2.4.4 Mulching section lowering
Pressing this key will turn on the mulching sec on lowering func on. To end the lowe-
ring, press the key again and the mulching sec on lowering func on will turn o
ff .
2.4.5 Pre-emergent marking of tramline
Pressing this key will turn on the pre-emergent tramline marking func on. The func on
enabling is indicated by yellow color of the key. Its subsequent func ons are derived
from the tramline valves func on. In case the tramline valves close and unsown marks
are created, the pre-emergent marking automa cally lowers. Upon opening of the val-
ves, the pre-emergent marking raises. By pressing the key again, the
pre-emergent tramline marking func on turns o ff .
2.4.6 Markers automatics
Pressing this key will turn on the func on of automa c switching-over of the markers
at the dead centre. The key will be highlighted in yellow . By this, the
automa c switching-over is enabled and the posi on of markers will always automa -
cally change a er raising.
2.5 Procedure with the markers automatic switching-over function enabled:
If the automa c func on is enabled in the second screen, use the key to return to the
fi rst screen.
Now, based on which side of the fi eld you intent to start, press either the le or right marker lowering key.
Prior to the selec on of the marker, the seed drill must be uncondi onally raised, both keys must be grey-co-
loured and the markers symbols on the icons must point upwards. A er pressing the marker corresponding
key, both markers will turn green and the symbol of the pressed marker will point down. Immediately a er the
start of the drill lowering, the pre-selected marker will lower as well. At the ride end, during the drill raising,
both marker keys will switch-over and the lowered marker will automa cally raise. At the subsequent lowe-
ring of the drill, the second marker will start lowering.