Rado A100, Инструкция по эксплуатации

Страница: 16 / 20

14
2.7 Setting the operational times of the hydraulic functions
This sec on of the screen enables the se ngs of the mes necessary for individual hydraulic func ons of the
drill. The mes can be set within a range of 1 to 100 seconds according to your need.
Every drill has a di
ff erent fl ow rate and oil pressure (hydraulic circuit power output), therefore the mes of
individual movements may signi fi cantly di ff er.
In overall, it is possible to set six di ff erent hydraulic func ons:
2.7.1 Drill folding
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.
2.7.2 Drill unfolding
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.
2.7.3 Drill raising
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.
2.7.4 Drill lowering
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.
2.7.5 Markers raising
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.
2.7.6 Markers lowering
Press the key, set the required value in the se ng dialogue and con fi rm it by pressing
the OK key. The new value will be automa cally stored in the memory.