Rado A100, Инструкция по эксплуатации

Страница: 7 / 20

5
1.9 Night and day mode change
Pressing the display in the date and me displaying area will invoke the night mode
display which is less highlighted and does not disturb during work at night. Pressing the
same area again will return the day mode display.
1.10 Seeding mechanism speed
Displays the actual value of seeding mechanism speed during the drill opera on. The
speed range is within a scale of 0 rpm to 255 rpm. The maximal speed range is given by
the manufacturer and is derived from the width and the maximal travel speed of the
drill. In case the seeding mechanism stops during drill opera on, a zero speed value is
displayed and an acous c signal is sound to alert the operator about this serious fault.
In case the speed value is lower or higher than the required speed, the speed numerical
value is highlighted in red and an acous c signal is sound. This signals to the operator
that he must either reduce the seeding assembly travel speed or stop the drill and check
the seeding mechanism for possible faults. To manually stop the doser, press the
speed numerical value. By this, the STOP symbol will be displayed instead of the speed
value and the doser motor will be blocked during driving. By pressing the STOP symbol,
the doser motor will return to the standard opera on mode.