Setting Up and Programming the Digital Receiver
Page 24
Version 1.0
7.6 Manual
Channel
Preselection
7.6.1
Entering the Downlink Frequency
Once the settings of Sections 7.5.1 through 7.5.4, above, have been concluded, you may manually
preselect any of the channels falling within the various preset downlink frequency bands, as follows:
•
While in the “Installation“ menu, use the
p
and
q
keys to
highlight the “Manual Search” field.
•
Press the MENU-key.
•
Use the
p
and
q
keys to highlight the “Down Frequency” field:
•
Press the MENU-key to confirm your selection.
•
Use the numerical keys to enter the desired downlink frequency
(refer to satellite-television magazines for lists of the downlink
frequencies of the various broadcast channels).
•
Pressing the EXIT-key will delete the entire entry.
•
Pressing the
t
key will delete the rightmost digit of the entry.
•
Once the entry is correct, press the MENU-key to confirm it.
MENU/EXIT
Setup Value
Down Frequency
Manual Search
1 - 3 - 6
Symbol Rate
LNB Local
5150MHz
DiSEqC
4
Down Freq
3700MHz
LNB Polar Horizontal
Symbol Rate
28.100MHz
22KHz
ON
LNB Polarity
Start Search
MENU/EXIT
Setup Value
DownFrequency
Manual Search
1 - 3 - 6 - 1
Symbol Rate
LNB Polarity
Start Search
3700
MHz
