Setting Up and Programming the Digital Receiver
Page 18
Version 1.0
7.4 Setting
Decoder
Status
Selecting the TV Aspect Ratio:
•
Use the
p
and
q
keys to highlight the “Decoder Status” field.
•
Press the MENU-key.
•
Use the
p
and
q
keys to highlight the “TV Aspect Ratio” field.
•
Press the MENU-key.
•
Use the
t
and
u
keys to select the aspect ratio, 4:3 or 16:9,
for your television set.
•
Press the MENU-key to confirm your selection.
Changing the DiSEqC:
NOTE:
You will not be able to work with the Digital Satellite Equipment Control (DiSEqC)
unless your satellite system is equipped with a DiSEqC-switch.
CAUTION:
This feature is used for reconfiguring receiver setup when changes have been
made to an existing DiSEqC-distributor. These settings should thus be altered by
trained specialist personnel only.
•
Use the
p
and
q
keys to highlight the “DiSEqC Change” field.
MENU/EXIT
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4 - 1
DiSEqC Change
All Channel Clear
System Information
4 : 3
16 : 9
MENU/EXIT
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4 - 2
DiSEqC Change
LNB Polar
Vertical
OLD
NEW
Band
Low
Sat System
A
All Channel Clear
System Information
1
1
