Radix DSR 9000 TWIN, Руководство пользователя

Страница: 50 / 56

DSR 9000 Twin 2005.02.04 (GB) - 22
GB
Press the MUNU button on the remote control.
Select " Installation ", and then press OK button.
Select " Delete All Channels ", and then press OK button.
When the " Input Password " message appears, enter the password ( " 0000 " ).
When the message asking you to confirm the delete operation appears, press the OK button.
8.5 Antenna Positioner / DiSEqC1.2
8.4 Parental Lock Manager
Parental Lock Manager
22
Press the MENU button on the remote control.
Select "Parental Lock Manager".
When the "Input Password" message appears, enter the
Password. The factory default user password is '0000'.
When the Parental Lock Manager screen appears, set the
following items.
3). Delete all Channel
2). STB to STB ( Ch. Data or Software )
Use a RS232C cable (cross type) to connect the two Receivers.
Select " Data Transfer " in the Installation Menu, and then press the OK button.
Select " Ch. Data Sender "(STB to STB ) or " Software Sender " for the STB that will send the
channel data or software. The sender STB has latest Ch. Data or software.
Select " Ch. Data Receiver "(STB to STB ) or " Software Receiver " for the STB that will receive
the channel data or software.
Press the OK button on the two Receivers to start the transfer. "Sending" appears on the sending
receiver and "Receiving" appears on the receiving Receiver.
The transfer progress bar shows the progress of the channel data or software transmission.
When the transfer is completed, "Complete" appears.
You can check that the channel data or software on the Slave and Master STB are same.
This allows you to lock particular channels or the Receiver itself. For example, you can prevent your
children from accessing adult program using this function.
Use this if necessary to delete all your channels . If you use this, channels only will be deleted without
affecting your existing settings
1.Channel Lock
Select the channel you want to lock. When someone switches to the locked channel, the password
screen will appear.
2. Access Lock
Enable or disable whether to ask for the password when the Receiver is powered on. This may be set
either to On or Off.
3. Change Password
Select this to change the password. When someone switches to the locked channel, the password
screen will appear.
Refer to Section 7.2 on Antenna Positioner for details.