Radix DSR 9000 TWIN, Руководство пользователя

Страница: 43 / 56

DSR 9000 Twin 2005.02.04 (GB) - 15
GB
1. Satellite
Select the satellite you want to track.
2. LNB Local Frequency / 3. DiSEqC / 4. 22kHz
Set the LNB information or DiSEqC information for the satellite.
You can use the existing setting. To change the setting, press
The buttons and make changes. Refer to Section 7.2 on
DiSEqC Setting for more details.
6. LNB Polarity
Set the LNB polarity of the TP to Horizontal or Vertical.
7.1.2 Manual Search
Manual Search
15
3. Select TP
You can select the transponder (TP) you want to use and
check the difference in signal strength and reception quality
from one transponder to another.
4. DiSEqC
Refer to Section 7.2 on DiSEqC Setting for details.
5. Channel Search
Select the type of channels to search : Free, Scrambled, ALL
and Network.
Use this channel search by entering the TP information manually to the Receiver. This channel search
is often used to search for a particular channel or those channels that Auto Search has missed, but
requires comparatively more expertise.
Select "Manual Search" and then press the OK button.
Set the following parameters.
6. Network Search
In this search mode, the Receiver first collects network information from the TP you selected.
Then an Auto Search takes place to research all the channels in that network. The number of
searched channels may vary, depending on the
TPs present in that network. Select Network Search
and then use the buttons to set it.
After the settings are completed, select "Channel Search" and then press the Red(Audio) button.
TV and radio broadcast channels will be searched.
The names of the channels will be listed. Press the
EXIT button to return to Viewing Mode and
check that the reception of the selected channel is good.
After the settings are completed, select " Next " and then press
the OK button.
7. TP Frequency
Set the Down Frequency of the TP
8. Symbol Rate
Set the Symbol Rate of the TP.
9. Search Type
Select the type of channels to search : Free, Scrambled, ALL and
Network.
10. Start Search
Press the OK button to start searching.
Another search method is Advanced Search. Use this channel search to search for a particular channel
or channels that you couldn't find using Manual Search. Enter the PID of the channel you want to
search.