Radix DSR 9000 TWIN, Руководство пользователя

Страница: 49 / 56

DSR 9000 Twin 2005.02.04 (GB) - 21
GB
Use the buttons to select the satellite you want to delete.
Press the button. A message asking for your confirmation appears.
If you want to delete, press the OK button. Otherwise, press the BACK button or the EXIT button.
When the TP information input field appears in the right
panel, press the
OK button.
Enter the TP information, such as the Frequency,
Horizontal/Vertical, Symbol Rate, etc., and then press the
OK button. Use the Numeric buttons to enter Frequency and
Symbol Rate information, and use the buttons to enter
Horizontal/Vertical information.
Press the OK button to register the TP information.
Installation
21
1). PC to Receiver(STB)
4). To Remove Satellite TP Information
Move to the TP information you want to delete.
Press the button. A message asking for your confirmation appears.
If you want to delete, press the OK button. Otherwise, press the BACK button or the EXIT button.
Use an RS-232C cable (cross type) to connect the Receiver
to your PC.
In your PC program, set your PC as "Receiver (PC to
Receiver)". "Receiver" signifies the device that is transmitting
the channel information.
Select " Data Transfer " in the Installation Menu, and then
press the OK button.
Set the Receiver as " CH. Data Receiver (PC a to Receiver) ".
This signifies the device that is receiving the channel
information.
Follow the instructions in the PC program to complete the
rest of this process.
3). To Modify Satellite TP Information
2). To Delete the Satellite
Use this to delete the selected satellite. However, you won't be able to delete any of the satellites,
which were set as factory defaults.
To modify the TP information, move to the satellite you want and then press the OK button. The
satellite TP information appears on the right side of the screen.
Select the TP information you want to modify and then press the OK button. Modify the Frequency,
Horizontal / Vertical, Symbol Rate, etc. Use the Numeric buttons to enter Frequency and Symbol
Rate information, and use the buttons to enter Horizontal / Vertical information.
After the changes are made, press the OK button to update the TP information.
To cancel the TP information modification process, press the BACK button.
3. Data transfer
Use this to transfer the channel information and software on one STB to PC or STB to STB.
You will need suitable software to transfer the channel
information to your PC. This software will be provided by the
store from which you purchased the Receiver.