![background image](http://html.mh-extra.com/html/radionics/d9210b/d9210b_program-entry-manual_780454010.webp)
ACCESS
Event Profile
32207C 3/97
D9210B Program Entry Guide
© 1997 Radionics
Page 10
EVENT PROFILE
This programming category is used to determine if events are created for:
•
Access Granted and Access Denied
•
Door Requests
•
Door state changes due to manual (command center) or automatic
scheduled or armed state changes (skeds/hold open on disarm, normal
on armed) operation.
Door #
Default:
1
Selections:
1 - 8
Enter the door you are about to program.
Programming Tip: RTE events require Access Granted to be programmed
YES.
D# Access Granted?
Default:
No
Selections:
Yes or No
This program item determines if
ACCESS GRANTED
and
DOOR REQUEST
events are sent to the panel for processing memory, printing, and remote
reporting.
A successful access event can be initiated by a:
•
valid user ID
•
valid door state changed at the command center
•
automatically scheduled or armed state changes that hold a door open
•
request to enter/exit (RTE/REX).
Yes -------- Access events from this door controller will be sent to the panel for
processing.
No ---------- Access events from this door controller will not be sent to the panel
for processing.
D# No Entry?
Default:
No
Selections:
Yes or No
This program item determines if
No Entry
events are sent to the panel for
processing memory, printing, and remote reporting.
A No Entry event may be caused by:
•
invalid or unknown user ID, interlock or secured door, or incorrect authority
level
•
request to enter/exit (RTE/REX) for door in interlock or secured door.
Yes -------- Access denied events from this door controller will be sent to the
panel for processing.
No ---------- Access denied events from this door controller will not be sent to
the panel for processing.
www.PDF-Zoo.com
firealarmresources.com
Содержание D9210B
Страница 12: ...firealarmresources com ...