RadioMaster MT12, Инструкция по эксплуатации

Страница: 44 / 49

Wav volume - The volume for alerts and warnings and sounds that are played with the Play track special
function
Bg volume - The volume for background .wav files (music) that are played with the BGMusic special function
Vario (Variometer)
Volume - Volume for variometer beeps
Pitch zero - Low pitch frequency
Pitch max - High pitch frequency
Repeat Zero - The time before the tone repeats in milliseconds
Note: In order for the variometer to function, it must be turned on via the Vario special or global function.
See Special Functions for more information on how to configure this.
Haptic
Mode - configures when the radio vibrates.
•
All - Vibrates when the buttons are pressed and when there are alerts or warnings.
•
No Key - No vibrations when buttons are the pressed or scroll wheel is turned but does vibrate when there
are alerts or warnings.
•
Alarm - Only vibrates for alarms or warning sounds.
•
Quiet - No vibrations are made
Length - Duration of vibration.
Strength - Strength of vibration
Contrast - Screen contrast setting.
Alarms
Battery Low - Voltage to trigger low battery alarm.
Inactivity - Time to trigger inactivity warning.
Memory low - Enable/disable low memory warning.
Sound Off - An "alarms disabled" visual warning is displayed when the transmitter is turned on if the sound
mode is set to quiet.
RSSI Shutdown - Checks if a receiver is still connected to the radio on attempted shutdown. Makes a audio
and visual alert if one is detected.
Backlight
Mode
•
Off – Always off.
•
Keys – Turns on when buttons are pressed.
•
Ctrl – Turns on when sticks, switches, and knobs are used.
•
Both – Turns on when buttons, sticks, switches, and knobs are used.
•
ON – Always on.
Duration - The length in seconds that the backlight is on. The minimum value is 5 seconds. The maximum
value is 600 seconds.
Brightness - Screen brightness level.
Alarm - The backlight turns on when there are alarms or warnings.
Splash Screen - Duration to display the splash screen.
Power On delay - The delay between when the power button is pushed and when the radio turns on. The
options are: 0s, 1s, 2s, 3s
Pwr Off delay - The delay between when the power button is pushed and when the radio shuts off. The
options are: 0s, 1s, 2s, 3s, 4 s. It is recommended to set at least a 1s delay in order to prevent the radio from
being shut off in the case of an accidental button press.
Owner ID - Custom registration ID used only for users with ISRM modules.
Time Zone - Time zone radio is operated in.
Adjust RTC - Adjust the transmitter's real-time clock to match the time determined by the GPS.
GPS Coords - The GPS coordinate format that will be displayed.
Country code - Used by some RF modules to ensure adherence to local regulatory RF requirements. Options
are America, Japan, Europe.
Voice language - Language for the voice pack. This setting and the voice pack folder on the SD card must
match for the sounds to be played.