RadioMaster MT12, Инструкция по эксплуатации

Страница: 21 / 49

•
Positions - The type of button that will be simulated.
o Push - will only map to one button
o 2POS - 8 POS - will map to the number of buttons that the switch has (ex: 3POS will map to 3
buttons).
•
Button No: The button number that the output will be mapped to and sent to the target device as.
Axis mode options for a selected channel
Axis - The channel is used to simulate an axis and will be mapped to one of the target device's default axes.
•
Axis options are: X, Y, Z, rotX (rotation x), rotY, rotZ
Sim mode options for selected channel
Sim - The channel is used to simulate a common sim axis and it will be listed on the target device as the selected
option (ex: Thr)
•
Sim Axis options are: Ail , Ele , Rud , Thr
3.2. Drive Modes
Drive modes allow you to have different trim settings for each Drive mode. Once multiple Drive modes are
configured, you can adjust the trim settings in each Drive mode without affecting the trim settings in other Drive
modes (unless they are configured to do so). There are nine possible Drive modes, with Drive mode 0 being the
default mode.