Functions
Below are all the available functions in EdgeTX, what they do, as well as what additional configuration
options that will be shown when the function is selected.
Override
(Channel Override) - Overrides the defined channel with the defined value.
•
CH
- Channel to be overridden
•
Value
- Value to replace the normal channel value. (Range -100 to +100)
Trainer -
Enables trainer mode.
•
Value
- Specifies which controls will be given over to the student. Options include
Sticks
(all sticks),
Rud
(Rudder),
Ele
(Elevator),
Thr
(Throttle),
Ail
(Aileron), and
Chans
(all channels).
Inst. Trim
(Instant Trim)- Sets all trims to the current values of their respective sticks.
Reset
(Reset Timer)- Resets the timer or telemetry specified in the value back to their initial values.
•
Reset
- Options are
Tmr 1, Tmr 2, Tmr 3, All,
and
Telemetry.
See
for more information on
what data is reset for each option.
Set
(Set Timer) - Sets the specified timer to the specified value.
•
Timer
- Options are
Tmr 1, Tmr 2, Tmr 3
•
Value
- The range is 00:00:00 to 08:59:59
Adjust
(Adjust Global Variable) - Changes the value of the specified global variable.
•
Global var
- Select the global variable that you want to adjust.
•
Mode
- Select the mode to change the global variable. Options are:
Constant, Mixer Source, Global var,
Inc/Decrement.
Long-press the
[Enter]
button to select the mode.
o
Constant
- Sets the specified global variable to the defined constant value.
o
Mixer Source
- Sets the specified global variable to the defined mixer source value.
o
Global Var
- Sets the specified global variable to the defined global variable value.
o
Inc/Decrement
- Increments/decrements the specified global variable by the specified amount.
Volume
- Changes the radio volume. The change source is specified in the Volume dropdown.
SetFailsafe
- Sets the custom failsafe values for the selected module (Internal/External) to the current stick
position when activated. For this option to work, the Failsafe mode for the RF module must be set to
custom
.
Play Sound
- Plays the sound selected in the value field when activated.
•
Value
- Sound to play. Possible values are
Beep1/2/3, Warn1/2, Cheep, Ratata, Tick, Siren, Ring, SciFi,
Robot, Chirp, Tada, Crickt, AlmClk
.
Note: SD card sound pack is not required.
•
Repeat
- Frequency to repeat the sound. Options are
!1x
(do not play at startup even if the switch is active),
1x
(play once),
1s
thru
60s
(play every xx seconds).
Play Track
- Plays the .wav sound file selected in the value field when activated.
•
Value
- .wav sound file to play from the SD card.
•
Repeat
- Frequency to repeat the track. Options are
!1x
(do not play at startup even if the switch is active),
1x
(play once),
1s
thru
60s
(play every xx seconds).
Play Val -
Announces the value of the selected element in the value field.
•
Value
- The source for the value to announce. It can be an input, stick, pot, slider, trim, physical and logical
switch, trainer import channel value, global variable, telemetry sensor or channel.
•
Repeat
- Frequency to repeat the announcement. Options are
!1x
(do not announce at startup even if the
switch is active),
1x
(announce once),
1s
thru
60s
(announce every xx seconds).
Lua Script
- Executes the Lua script defined in the value field. The Lua script must be located in
/SCRIPTS/FUNCTIONS/ folder on the SD card. Lua scripts that display information on the screen cannot be
executed with this special function.
•
Value
- LUA script file to play from the SD card.
•
Repeat
- Frequency to repeat the Lua script. Options are:
ON
(repeat indefinately as long as switch is active)
or
1x
(once)
BgMusic
- Plays the .wav file selected in the value field on a loop when enabled. The file shall be in the
SOUNDS/(language)/ folder on the SD card.
BgMusic II
- Temporarily pauses the .wav file playback specified in the
BgMusic
Vario
- Enables the variometer beeping sound for the ascent and descent of the model.
Haptic
- Causes the radio to vibrate (haptic feedback) when enabled.
•
Value
- Type of vibration pattern. Options are: 0 - 4.
Содержание MT12
Страница 5: ...1 3 Radio overview...
