INSTALLATION INSTRUCTIONS
CONDENSING BOILOES WITH STORAGE - TG05A095.A0306
12
B
C
A
3.2 Unpacking
■
The materials (cardboard) used for packing the appliance are fully recyclable.
■
It is recommended that the packing material is only removed prior to installing the boiler. The
manufacturer will not be held responsible for damage caused by incorrect storage of the product.
■
Packing materials (plastic bags, polystyrene, nails, etc.) must not be left within reach of children, in that
these items represent a potential hazard.
A.
Place the packed
appliance on the floor (fig.
1) making sure that the
"up” arrow is facing down.
Remove the staples and
open out the four flaps of
the box.
B.
Rotate the boiler
90° while manually
supporting it from
underneath
C.
Lift the box and
remove the protections.
Lift the boiler by grasping
the rear part and proceed
with the installation.
STORAGE & HANDLING
Please note that prior to installation the Radiant boilers should be stored in the horizontal position with no more
than three boilers to a stack;
Ensure that the boilers are stored in dry conditions and be aware that the carton is a tow-man lift;
Please check that this boiler has been supplied with an unvented inlet kit and flue system
Fig. 1
Содержание RKA 25
Страница 2: ......
