Radiant RKA 25, Инструкция по эксплуатации

Страница: 38 / 56

REGULATION INSTRUCTIONS
CONDENSING BOILOES WITH STORAGE - TG05A095.A0306
34
5. COMMISSIONING THE BOILER
5.1 Parameter table
PARAMETER
N°
FUNCTION
PARAMETER
VALUE
OPTIONS
1 SELECTS TYPE OF BOILER
00
01
02 INSTANTANEOUS BOILER
BOILER WITH STORAGE TANK
BOILER TANK WITH +7°(stored water temp. increased by 7°)
2 SELECTS TYPE OF GAS
00
01 NATURAL GAS
LPG
3
SETS THE CENTRAL HEATING
TEMPERATURE 00
01 30-80°C FOR STANDARD SYSTEMS
25-40°C FOR FLOOR SYSTEMS
4
SELECTS THE PUMP MODE
DURING HEATING PHASE
00
01
.
STANDARD ( 3 ‘ PUMP OVERRUN)
PERMANENT (PUMP RUNS CONTINUOUSLY)
Note: to be activated
ONLY FOR SYSTEM BOILERS
5 WATER HAMMER PREVENTION
00
01 OFF
ON (2” delay on D.H.W production)
6
CENTRAL HEATING TIMER
(FACTORY SET AT 180” –
PARAMETER VALUE “36” )
00 - 90
DELAYS THE HEATING RESTART TO PREVENT FREQUENT
ON/OFFS, EXPRESSED IN 5 SEC STEPS.
e.g. 90 (parameter value) x 5 = 450“ (7.5 minutes)
7
CENTRAL HEATING POST-
CIRCULATION TIMER
(FACTORY SET AT 36 = 180’’–)
00 - 90
THE HEATING POST-CIRCULATION TIME CAN BE MODIFIED
AND IS EXPRESSED IN 5 SEC STEPS.
Adjustable from 0 (OFF) to 90 = 90 x 5 = 450“ (7.5 minutes)
8
D.H.W POST-CIRCULATION
TIMER
(FACTORY SET AT 18 = 90” )
00 - 90
THE D.H.W POST-CIRCULATION TIME CAN BE MODIFIED AND
IS EXPRESSED IN 5 SEC STEPS.
Adjustable from 0 (OFF) to 90 = 90 x 5 = 450“ (7.5 minutes)
9
GAS MODULATION MINIMUM
SETTING
-
Set the fan working frequency at the minimum heat output on
d.h.w..
(PRESET AND FIXED VALUE = 20 for NAT GAS and LPG)
10
CENTRAL HEATING OUTPUT
MINIMUM SETTING
(DEFAULT VALUE = 24)
-
Set the fan working frequency at the minimum heat output on
central heating.
(PRESET AND FIXED VALUE = 24 for NAT GAS – 21 for LPG)
11
MAX GAS FLOW RATE AND
HEATING OUTPUT
(DEFAULT VALUE = 66)
par. 10 value –
99
Set the fan working frequency at the maximum heat output on
central heating.
(PRESET VALUE = 65 for NAT GAS and LPG)