Radiant Pools Keystone, Инструкция по сборке

Страница: 7 / 16

Be sure that bottom channel and wall panels are free of debris before beginning assembly.
Connecting Straight Panels
WALL PANEL ASSEMBLY
45 o Corner
Connector
Straight Panel
Connector
Connecting Panels at 45
0
Corners
Once bottom track is assembled, begin
assembling wall panels. Always start with
the end 45
0
corner connections first, working
towards the middle as shown. It is important
that the final panel assembled is a straight
panel connection. As wall panels are
assembled, install top channel per
channel assembly instructions on page 7.
Insert panels in bottom channel in pool interior
side of track as shown below. When connecting
the 45
0 corners, make sure to align the center of
the connector with the angle of the bottom track.
These must be properly aligned or installation of
subsequent panels will be difficult.
Pool
Interior
Pool
Interior
Wall Panel
Bottom Chanel
Pool
Interior
When corner panels on both ends are
assembled, begin with the straight panel
assembly, working towards the middle as
indicated above. Slide panels into bottom track,
connecting as shown at right. Continue this
process with the remaining wall panels stopping
before installing the final wall panel.