Radiant Pools Keystone, Инструкция по сборке

Страница: 14 / 16

INSTALLING FACEPLATES
Once the water level reaches 2”-3” from the return and skimmer, install the faceplates.
Carefully locate the screw holes in for each opening. Once located, carefully puncture the
liner with an icepick or nail. Attach faceplate with 1” screws and hand tighten evenly till snug.
Using a razor knife, carefully trim the liner out of the openings for the skimmer and return.
When done, install the eyeball into the return.
Trim liner from return opening.
Return faceplate installed.
Please refer to manufacturers’ installation instructions for all other installation components,
including liner.
COMPLETING INSTALLATION
Skimmer faceplate installed.
Locate screw holes for faceplate.