To install the light niche mounting plate assembly
you must place the mounting plate on the inside
of the pool. Light niche goes behind the mounting
plate. Be sure to align the niche to the hole pat-
tern on the mounting plate. Place 4 bolts through
the pool and through the mounting brackets.
Tighten nuts to a snug fit, but do no over tighten
as this will damage the mounting plate.
Once the mounting plate
assembly is complete, you can
proceed to light installation.
For inground or semi-inground
installation, this step must
be done before you pour
your concrete collar.
STRAIGHT PANEL TO STEP CONNECTION (OPTIONAL)
Countersunk
Bolts (4)
Nuts (4)
Mounting Brackets (2)
Mounting Plate
LIGHT NICHE MOUNTING PLATE ASSEMBLY (OPTIONAL)
Pool
Interior
Wall Panel
Straight
Step
Adaptor
Thermoplastic Step
Step Flange
Connection Clip
Top Channel
Flange Extension Plate
Connection Clip welded
into bottom channel
*
Please refer to manufacturer’s
instructions for proper light installation.
Содержание Keystone
Страница 1: ...Keystone Pool Assembly Manual...
Страница 2: ......
