Radiant Pools Keystone, Инструкция по сборке

Страница: 13 / 16

CONCRETE COLLAR GUIDE
Radiant Pools recommends a 6” to 8” inch concrete collar around the entire pool ( fig.1 ). It is also
recommended that a thicker (8”-12”) concrete collar is poured at each A-frame location ( fig.2 ).
It is strongly recommended that the concrete not be poured directly on the wall or flood behind
the pool wall. Exceeding 12 inches of concrete is not recommended or necessary.
Undistrubed Earth
2'
12"
8"
Drift Pin
Drift Pin
Undistrubed Earth
8"
12"
Drift Pin
Concrete Collar
at A-Frame
Location
Concrete Collar
fig.1
fig.2
Estimating Concrete Requirements:
These are minimum estimating figures. It is recommended that estimates be on the high end
as the excess can be poured around A-Frame. Combine both figures below for total yards of
concrete required.
Collar: Pool Perimeter (ft.) x .02 = Yards required.
A-Frames: Approximately 1/10 (.10) yard each required.
Pool
Interior
Pool
Interior