33
EN
i
17. Setting the motor speed for automatic functions
The speed of the motor can be configured for recurring
automatic functions if necessary (e.g. to reduce noise).
Recurring automatic commands are executed at the con-
figured motor speed.
Manual movement commands and the first automatic run
after the system has been operated manually are always
executed at maximum motor speed..
1.
+
+
Simultaneously press and
hold the buttons for
4 seconds.
2.
One of the three LEDs will
light up red depending on
the set motor speed.
3.
/
Set the desired speed.
=
faster
=
slower
Pay attention to the LEDs
= low speed
= average speed
= maximum speed
4.
Carry out a test run.
This option remains active for approx. 4 seconds.
/
Test the set speed and
noise level.
