manualshive.com logo in svg

RADEMACHER RolloTron Standard, Перевод оригинального руководства по эксплуатации и сборке

Поделиться
Скачать
RADEMACHER RolloTron Standard Скачать руководство пользователя страница 15

15

EN

20 cm

 CAUTION!

There is a risk of injury from the pre-tensioned springs 
on the old belt winder.

 

◆

The spring unit can suddenly recoil when it is removed.

 

◆

Hold the spring unit firmly when loosening the belt 
and allow it to recoil slowly until the spring unit has 
completely unwound.

7.2  Preparation for installation

2. 

Remove the old belt winder, if you are carrying out a 
conversion to an existing roller shutter system.

2.1 

Let the roller shutter move fully down, until the slats are 
completely closed.

2.2 

Remove the old belt winder and unreel the belt.

3. 

Prepare the belt.

3.1 

Cut the belt off approx. 20 cm under the belt box. 

3.2 

Fold the end of the belt over by approx. 2 cm and cut a 
short slit in the centre. This enables you to subsequently 
hook the belt onto the reel.

Recommendation

The belt must run as straight and freely as possible. For 
stiff roller shutters, mount a deflection roller on the belt 
box. This helps to prevent unnecessary friction and wear 
to the belt.

i

Accessories, see page 44.

Содержание RolloTron Standard

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды