18
THE RADCLIFFE WHEELBASE
14
ADJUSTING TELESCOPIC PUSH HANDLES
The push handles allow an extra 160 mm of height adjustment and can be folded down
independently.
To Fold and unfold the push handles refer to FOLDING THE WHEELBASE page 11, Section
8.
To Adjust the Height
:
•
Unlock the tri-wheel knob by turning it anti-clockwise
•
Pull or push handle to desired height
•
Securely tighten the tri-wheel knob by turning it clockwise.
15 MOVING IN AND OUT OF THE WHEELBASE & SEAT
•
Ensure that both the wheelbase hub brakes are on.
•
If in the tilt position, depress the gas strut pedal and put the wheelbase in
the upright position.
•
Lift the footplates up.
•
If necessary remove the armrests.
Refer to the seating supplier's handbook regarding any instructions connected with the
seating system to assist the occupant out of the seat.
11
User/Carer Handbook
7b
OPERATING AND APPLYING THE SHADOW CLASSIC BRAKES
Your Shadow Classic wheelbase is fitted with SP500 attendant brakes as shown be-
low.
•
To apply the brakes, grip the end of the lever and pull upwards gently but
firmly until the brakes lock into position.
•
Whilst holding the wheelbase in position immediately apply the brake on the
other side of the wheelbase by operating the above.
•
When both left hand and right hand brakes are locked into position, check
that the wheelchair is securely anchored.
•
Never let go of the wheelchair until both brakes are locked into position.
Brakes Engaged
Brakes Disengaged
