Add Firewall Rule
Description:
A meaningful description about the purpose of this rule.
Action:
Whether the packets of this rule should be allowed or denied.
Log matches
Throw a syslog message if rule matches.
Incoming interface:
The Interface on which matching packets are received.
Outgoing interface:
The interface on which matching packets are received.
Source:
Source address of matching packets. Possible values are "ANY", "LOCAL"
(addressed to the system itself), "Group" or "Specify" (specified by an
address/netmask).
Destination:
The destination address of matching packets, can be "ANY", "LOCAL"
(addressed ... itself), "Group" or "Specify (specified by address/netmask).
Protocol:
Used IP protocol of matching packets.
Destination port(s):
Destination port of matching packets. You can specify a single port or a
range of ports here. Note that protocol must be set to UDP/TCP when
using port filters.
Transparent Firewall
M!DGE/MG102i can be configured with its Ethernet interfaces being bridged. In this case, the transparent
firewall functionality can be configured to limit reachability of individual hosts connected to
M!DGE/MG102i based on their MAC addresses, i.e. units connected to ETH1 cannot communicate to
units connected to ETH2.
83
© RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
Web Configuration
Содержание MG102i
Страница 2: ......
Страница 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Страница 148: ...7 8 LOGOUT Log out from Web Manager MG102iGPRS UMTS HSPA LTE router RACOM s r o 148 Web Configuration...
Страница 174: ...174...
