RACOM MG102i, Руководство по эксплуатации

Страница: 7 / 175

1. MG102i router
1.1. Introduction
Although MG102i wireless routers have been specifically designed for SCADA and telemetry, they are
well suited to variety of wireless applications. MG102i HW and SW are ready to maintain reliable and
secure connections from an unlimited number of remote locations to a central server. Both standard
Ethernet/IP and serial interfaces are available. Moreover, two digital inputs and two digital outputs can
be used for direct monitoring and control of application devices.
MG102i versatility is further enhanced by two independent Ethernet ports. These can be configured to
either support two independent LANs (e.g. LAN and WAN settings), or simply connect two devices
within one LAN (effectively replacing an Eth switch). MG102i software is based on proven components,
including an Embedded Linux operating system and standard TCP/IP communication protocols.
Combining MG102i with a M!DGE single-SIM router in one network is quite straightforward because
of fully compatible interface settings and behaviour on all HW interfaces.
MG102i and M!DGE cellular routers are from the same product family, shares the same source code
and setting of many feautres is identical.
M!DGE/MG102i together with RACOM RipEX radio router offers an unrivaled solution for combining
GPRS and UHF/VHF licensed radio in a single network. Even a single RipEX in the center of a MG102i
network allows for efficient use of addressed serial SCADA protocols.
1.2. Key features
Mobile Interface Parameters
• Mobile Connection options: HSPA+, HSDPA, HSUPA, UMTS, EDGE, GPRS, GSM and LTE
• Global connectivity
• Transparent hand-over between 2G and 3G or 2G, 3G and 4G
Power supply
• Input voltage: 10.2 – 57.6 VDC
• Max. power consumption: 6 W
Services /Networking
• Fallback Management
• Connection supervision, Automatic connection recovery
• Quality of Service (QoS)
• OpenVPN, IPsec, PPTP, GRE, Dial-In
• VRRP
• OSPF, BGP
• DHCP server, DNS proxy server, DNS update agent, NTP
• Telnet server, SSH server, Web server
• Device server, Protocol server, SDK
• Port Forwarding (NAPT), Firewall, Access Control Lists
• Modbus TCP - Modbus RTU conversion
7 © RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
MG102i router