RACOM MG102i, Руководство по эксплуатации

Страница: 18 / 175

4.4. Technical specifications
Tab. 4.12: Technical specifications
Mobile Interface
UMTS
WCDMA, HSDPA, HSUPA, HSPA+ (3G): B1(2100), B2(1900), B5(850),
B8(900)
GSM (2G): B2(1900), B3(1800), B5(850), B9(900)
Data rates: max. 14.4 Mbps Downlink / 5.76 Mbps uplink
Mobile Interface
LTE
LTE (4G): B1(2100), B2(1900), B3(1800), B5(850), B7(2600), B8(900),
B20(800), all bands withs diversity
WCDMA, HSPA, HSPA+ (3G): B1(2100), B2(1900), B5(850), B8(900), all
bands withs diversity
GSM (2G): B2(1900), B3(1800), B5(850), B9(900)
Data rates up to 100 Mbps downlink / 50 Mbps uplink
5× Ethernet 10/100 Base-T, Auto MDX, 5× RJ45, bridged or routed Ethernet
1× 3-wire RS232 on 13-pin screw terminal block Serial Interface
2 digital inputs
Digital I/O
0–5.0 VDC level 0
7.2–40 VDC level 1, maximum voltage 40 VDC
2 digital outputs
Relay outputs 1
st
NO, 2
nd
NC
Limiting continuous current 1 A
Max. switching voltage 60 VDC, 42 VAC (Vrms)
Max. switching capacity 60 W on 13-pin terminal block
USB service interface
USB host interface supporting memory devices
USB type A connector
50 Ω Impedance:
Antenna Interfaces
SMA female Connector:
10.2–57.6 VDC (12–48 VDC –15 % / +20 %) Input voltage:
Power Supply
Power con-
sumption:
Rx max. 1.9 W
Tx max. 6 W
Environmental Condi-
tions
For indoor use only, IP40
Metal casing, DIN rail mounting kit included
–25 to +70 °C (–13 to +158 °F) Temperature range UMTS/WLAN:
–25 to +60 °C (–13 to +140 °F) Temperature range LTE:
0 to 95 % (non condensing) Humidity:
> 220.000 hours (> 25 years) MTBF (Mean Time Between Failure)
Vibration and shock hardening
Flat mounting Mounting
190 W × 104 D × 40 H mm (7.48 × 4.09 × 1.57 in), ca. 610 g (1.35 lb) Dimensions / Weight
CE, FCC Type Approval
MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o. 18
Product