You should next verify that a new channel button has been added for each new device added to the
system. If any devices are missing check the mechanical installation to insure all devices were properly
connected and repeat the process above.
After you have verified all the data channels are available click on the
Save
icon in the toolbar or select
the
Save
menu item located in the
File
main menu selection to save the modified configuration file to
disk. You are now ready to begin using your new sensor modules.
If you wish to change the default configuration on any of the new sensors added to your system simply
position the mouse cursor over the channel button on the desired sensor and click the right mouse
button. The easy edit dialog box for that module will be displayed. Please refer to Step 2 and 3 in the
previous section for detailed instructions.
Insure you add any new installed sensors to the Currently Selected Real Time Channels. Instructions for
this procedure can be found in the paperwork that accompanies each new sensor.
47