Wired start/stop logging switch with USB port
There is an optional wired start/stop logging switch, with USB port, available for use with the HD2 (RLACS237). This can
be purchased from our
.
The logging switch has a record button and LED, this replicates the behavior of the 'Record' LED on the front panel of
the HD2 unit. This allows the HD2 to be fitted in the vehicle without the need for the Record LED on the box to be
visible, and has a 3 m long cable giving greater flexibility for fitting options.
To use the USB function on the wired start/stop logging switch, the scene stored in the HD2 unit will need to be
edited. The '
Logging source
' option found within the
General settings (
area will need to be set to
'
USB drive
' in the drop down list and the '
Logging mode
' set to '
Manual
', as shown below. If the '
Logging mode
' is not
set to '
Manual
', the wired start/stop logging switch will act as an override to the selected mode.
Note: As an extra feature, if there is an SD card present in the unit, the HD2 will revert logging back to the SD
card should the USB stick become full during use or if the USB stick is absent/missing and recording is initiated.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/04_-
_HD2_Logging
40
