Terminology
Throughout this guide we will be referring to the following:
Scenes
A Scene is the setup file (‘.VVHSN’ file) which defines the layout of the graphical overlay and sets the system
parameters such as logging conditions, CAN channels, lap-timing information etc. There is a default scene included
within the HD2 firmware - shown in the image below. This will always remain stored on the units memory and can be
loaded at any time using a OLED display.
This default scene has a speed gauge, g-ball, on screen laptiming elements and a track map all included, allowing the
unit to be used straight out of the box at any circuit in our database - there is no need to change anything.
If you would like to quickly create a different simplistic scene without using Setup Software, an
is
available, which enables you to quickly choose from a selection of template designs containing the elements included
within the default scene. You can select specific car parameters from our CAN database and also add your own logo.
The scene can then be uploaded on to the unit by saving to an SD card and inserting into the powered VBOX.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/01_-
_HD2_Introduction
3
