macOS
6. Save to the SD card and remove.
Pairing HD2 with a logging switch
To pair a Bluetooth logging switch, first ensure that the HD2 unit is fully powered on.
1. Insert the SD card in to the fully booted VBOX Video HD2.
2. Pair the switch with the HD2.
3. If no other Bluetooth start/stop logging switch is paired with the HD2 and the unit is running
or later, the switch will automatically connect to the unit when turned on.
4. If another Bluetooth switch is paired with the HD2, the existing paired switch will need to be removed using
or the
.
5. To turn on, hold the Bluetooth switch within 1 m of the HD2 and press the ‘
Record
’ button – You should see the
Record LED flashing
orange
while it searches for VBOX Video HD2.
6. Once connected, the Bluetooth Record LED will flash
green
slowly (roughly once every three seconds). You can
now start/stop recordings and event mark files at the touch of a button.
Note: Only one logging switch can be paired to a VBOX Video HD2 at any time.
Note: The Bluetooth logging switch will go into ‘sleep’ mode after 1 minute of no activity.
If for some reason the Bluetooth switch does not automatically connect with the unit, a pairing file can be installed on to
the HD2 using the method below:
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/04_-
_HD2_Logging
33
