14
/
34
User Manual
Rev. 1.0 - 01/02/22
/RDS-TFT2HE, /RDS-TFT3HE & /RDS-TFT4HE
ELETTRONICA
If the user sets a station (1-1023) or an equipment (1-63) address, or both, the
messages will be created with the address and only the equipment that will
recognize itself into address will accept the configuration and will answer. The
addresses are used from subjected equipment in continuous data flow to recognize
their own from those reserved for other devices. When you use this program to
configure a device, you must select the correct address, or select “
Broadcast
” /
“
Tutti
” in order to have full access to the equipment.
The data transfer may take some time if device is configured to 1200bps, then
the user who wishes to use only RDS part can press “
Custom
” / “
Personalizza
”
and decide what to include or exclude from the data transfer to reduce the time.
