16
/
34
User Manual
Rev. 1.0 - 01/02/22
/RDS-TFT2HE, /RDS-TFT3HE & /RDS-TFT4HE
ELETTRONICA
The “
Read RDS
” / “
Leggi RDS
” button is used to read all data on equipment and
selected through “
Custom
” / “
Personalizza
” controls.
The “
Write RDS
” / “
Aggiorna RDS
” button is used to write to the RAM of equipment
all data present on document and selected through “
Custom
” / “
Personalizza
”
controls.
The progress is displayed in the field below the button, in case of transfer failure
appears an error code. To clear the error and resume the normal operation of
program, you must press the “
Stand-By/OK
” / “
Termina/OK
”. You can interrupt a
transfer before the end using this button. The transfer also ends for communication
problems with the equipment. The messages that accompany the transfer, or warn
about the failure of the same, are at the center of transfer zone in “LINK” window.
The “
Change Baudrate
” / “
Nuovo Baudrate
” button is used to modify the on
board communications.
When a transfer begins, whatever the direction, the PC search for equipment and,
after finding it, writes the version in the upper area. If the device communicates
with the UECP61 protocol, but is not compatible with the SUB_SET of POSITRON
CUSTOM commands, the version will be “UNKNOWN” and the configuration
process ends without updating the equipment. Only the top writing will be updated
