30
/
34
User Manual
Rev. 1.0 - 01/02/22
/RDS-TFT2HE, /RDS-TFT3HE & /RDS-TFT4HE
ELETTRONICA
6.20 Transmission Groups
Each DNS can transmit the RDS groups in a personalized way.
Advanced users can create their own sequence using the
Manual Configuration
section
. With the “EMPTY LIST” button you delete all groups. With the “DELETE”
button you remove the selected group from the list. With the “INSERT” button you
can add to the list, in the selected location, a group specified by the selector below
the same button.
The user who want to be helped to compile the list from the program, must select the
services you want to use, remembering that the “PSN-0A” service is automatically
added, and when they believe that you have completed your selection, press the
“
Group transmission wizard
” button and the program will autonomously create
a list of transmission. During the creating of list will abide to the rule that needs at
least 4 0A groups per second. This list automatically created is modifiable, after
its creation, as the list made directly by the user. In addition there are two “TMC”
and “RT+” special selections that create specific lists more complex for those who
use these services, however after the automatic generation can be modified in
manual mode.
Note that the
4A groups
are not loaded into the list and in case the user insert them,
will still be ignored. In fact the clock is enabled/disabled via a proper command
and does not respect the transmission but exits, if enabled, in synchronous mode
to the minute change of internal RTC.
6.21 Hardware Window
The hardware window contains informations regarding the equipment in general,
and to how communicate with it.
