![background image](http://html.mh-extra.com/html/r-tech/i-cut100p/i-cut100p_operation-instructions-manual_775155008.webp)
Connections for PLASMA I-CUT 100P
Front machine connections
Fig 2
1
.
Earth / Work piece connector
Connect the earth lead to this connector. Insert male connector into socket and twist clockwise
until tight. Secure other end of earth lead to work piece via the earth clamp.
2. FUSE
Pilot arc fuse
3. Torch power connector
Connect the main torch euro socket by locating and pushing in and the screw retainer clockwise
until tight.
Note: The head of torch has a safety feature, the machine will not work
if protective shroud is removed.
8