Introduction
The R-Tech PLASMA I-CUT 100P is a member of our field acclaimed family of welding products.
Premium features include:
1. Inverter power source - more efficient to operate, provides smoother weld characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF Pilot start - Enables easy arc start even on painted surfaces
4. HF pilot arc restart - ideal for cutting mesh etc
5. Digital amp meter
6. Quick fitting torch for easy torch fitment/replacement
7. Long life -Low cost torch consumables
8. 35% Duty cycle at 100 Amps @ 40
O
C
Recommended Processes
The R-Tech PLASMA I-CUT 100P is recommended for the plasma cutting processes within its output
capacity of 100 Amps DC
Equipment Limitations
The R-Tech PLASMA I-CUT 100P is protected from overloads beyond the output ratings and duty cycle
as per machine specifications with thermostat protection of the output coils and rectifiers and is rated at
100 Amps at 35% duty cycle on a ten minute basis. If the duty cycle is exceeded a thermal protector will
shut machine off until the machine cools.
Technical Specifications
MODEL
PLASMA I-CUT 100P
Power Voltage
415V 3 Phase 50/60Hz
Fuse rating
32Amps
Rated Output Current
100A
Current Adjusting Range
20-100A
No-load Voltage
200V
Rated Duty Cycle
35%
Starting Mode
HF Pilot Arc Start
Air Pressure
70 PSI
Max. Cutting Thickness (Clean cut mild steel)
32mm
Max. Cutting Thickness (Severance cut mild
steel)
40mm
After Flow Time
3-15 Seconds
Dimensions
515 X 220 X 395
4
