ULK3
Universal Light Kit (
Optional Accent Lighting Kit) MCVP42 & MCVST42
INSTALLATION:
Remove Glass Tray or Log Grates if installed. Refer to
MP42GT, MST42GT or M42LG Installation / Removal
.
STEP 1
: Remove cover plates and install lamps in firebox. Seal with fresh sealant (Mill-Pac).
STEP 2
: Connect lamp wires to jacketed transformer leads. Connect switch wires to black and red wires at
transformer, or plug black and red transformer wires together if 120V receptacle will be switch controlled.
REFER TO COMPONENT LOCATIONS SECTION OF MANUAL FOR TRANSFORMER PLACEMENT.
Please follow the current ANSI/NFPA 70 National Electrical Code in the USA and CAN/CSA C22.1 Canadian
National Electrical Code in Canada.
Contents of Kit:
[2] 12V Halogen Lamps
12VAC Transformer with 3 prong plug & wire connectors
Light Switch & Cover Plate c/w10ft wire c/w [1] Loose
Female & [1] Loose Male wire connector
Inside Firebox
Bottom
of
Firebox
31
