MP42RL -Brick Liner Installation- When using M42LG Log Grates
NOT FOR USE WITH MP42GT.
NOTE: Brick Liner must be installed BEFORE
M42LG is installed.
NOTE: Either Baffle (Heater Rated Units) or
Deflectors (Decorative Units) must be removed.
Refer to
Baffle Removal / Deflector Removal
sections of manual.
1. Remove Baffle (Heater Rated
Units) or Deflectors (Decorative
Units).
Refer
to
Baffle
Removal
/
Deflector Removal
sections of
manual.
2. Orient tabs in upper firebox as shown.
3. Insert Liner into Firebox.
4. Bend Tabs down over Brick Liner.
5. Reinstall all components.
MP42RL Consists of:
[1] – Back Liner
⚠
WARNING:
Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury
.
Tab
Tab
Tab
Tab
20
