MP42-GT Installation / Removal
42MCVP
Contents of Kit:
1 Glass Tray
NOT FOR USE WITH MP42RL.
Instructions:
To Install:
Place Glass Tray into
firebox as shown.
To Remove:
Lift Glass Tray from one
edge and carefully remove.
Use caution around pilot area.
Pilot Area Must Not
Be Covered
The following items can be used with
the Glass Tray:
ULK3 Light Kit
MQLOG1
MQLOG2
M42LOG3
RBCB1 Cannonballs
VLBIT4 or VLBIT6
Decorative Glass
MQSTONE
MQROCK2 or MQROCK3
MQEMBER
Refer to appropriate section in
manual for these items.
⚠
NOTE
Pilot Area Must Not Be Covered, as
delayed ignition can occur.
Pilot Shield should be visually inspected
monthly for signs of deterioration due to
flame exposure. Replace if necessary.
22