Qvis PIONEER 3, Руководство пользователя

Страница: 62 / 112

© Copyright QVIS ®. All documentation rights reserved. 55
[Channel]: to select the channel number so that you can view the
corresponding channel information;
[Compression]: select encoding standard
[Resolution]: Select what resolution you want to set for the channel, depending
on the maximum capabilities of the camera on the channel.
[Frame Rate]: can be adjusted, this is dependant on the front end setup of the
NVR.
[Bit Rate Type]: including Limited stream and variable stream;
[Quality]: change the quality to set the stream value. If facilities allow, the
better quality of the stream, the better the video image quality is;
[Bit Rate]: adjust according to capabilities of the system.
[I Frame Interval]: selectable frame interval range is between 2-12 seconds
[Video / Audio]: tick either box if you want to allow either/or video or audion to
be transmitted along the streams.
[Coding Mode]: (Only available on certain models) options include: Baseline,
Main profile, and High profile.
2.9.3 Network settings
Navigation (from shortcut menu): Main Menu -> Set -> IP -> Network
Configure IP address, gateway, DDNS of an IP camera you wish to add to your
system.