© Copyright QVIS ®. All documentation rights reserved.
99
11. The NVR cannot control the PTZ.
Possible reasons:
A.
There is something wrong with the frontal PTZ.
B.
The setting, connection or the installation of the PTZ decoder is not correct.
C.
The connections are not correct.
D.
The PTZ setting of the NVR is not correct.
E.
The protocols of the PTZ decoder and the NVR are not matched.
F.
The address of the PTZ decoder and the NVR are not matched.
G.
When multiple decoders are connected, the far port of the PTZ decoder line A(B)
must connect a 120 resistance to reduce the reflection otherwise the PTZ control
is not stable.
H.
The distance is too far.
12. The motion detect is not working,
Possible reasons:
A.
The time range set is not correct.
B.
The motion detect area set is not correct.
C.
The sensitivity is too low.
D.
Limited by some hardware edition.
13. I cannot login via web or CMS.
Possible reasons:
A.
The system is Windows 98 or ME. We recommend updating to windows 2000
SP4 or higher Version or installing the software for low edition.
B.
ActiveX is not installed or blocked by web browser.
C.
The version DX display dirver is not DX8.1 or later. Update the display card
driver.
D.
Network connection failure.
E.
Network setting issues.
F.
Invalid password or user name.
G.
The CMS is not matched the NVR program version.
Содержание PIONEER 3
