Qvis PIONEER 3, Руководство пользователя

Страница: 40 / 112

© Copyright QVIS ®. All documentation rights reserved. 33

The Calls of Cruise between Points : In Figure 2.12 please input the
cruise number in the
blank ‘Preset’ field, then go back to the PTZ Config
interface (Figure 2.14) and start Cruise between two points, PTZ
begins to work along the cruise line. Click Stop button to stop cruise.

Remove Preset
：
Please input the preset value in the blank Preset field
and click
the ‘Del Preset’ button, then remove the preset points.

Remove Cruise Line
：
Input the number of the cruise line, click
‘Del
Preset’ button, see Figure 2.15, then remove the cruise lines set
.

Scan: PTZ also can work on the same preset scan line
repeatedly/continuously.
Scan setup:
To set the PTZ to perform a scan tour please follow these steps:
Step 1: In Figure 2.12, click the
‘Advanced’ button to enter Figure
2.14
；
Step 2: Enter a number in input field
，
Click the key to be
taken to the PTZ config interface as shown in Figure 2.15. Navigate the
PTZ with the controls provided;
Step 3: In Figure 2.15, you can set the following items: Zoom, Focus
and Iris,
Step 4: Click the OK button to enter the menu shown in Figure 2.13.
Click the right mouse button again, enter Figure 2.12.