Alarm / tamper activation
Lights up green for about one
second
Alarm is sent once in 5
seconds
Battery needs replacing
During the alarm, it slowly
lights up green and slowly
goes out
Replacement of the detector
battery is described in the
manual
Functionality Testing
The Ajax security system allows conducting tests for checking the functionality
of connected devices.
The tests do not start immediately but within 36 seconds by default. The
starting time depends on the ping interval (the paragraph on “Jeweller” settings
in hub settings).
Installing the Detector
Selecting the location
Location of DoorProtect is determined by its remoteness from the hub and
presence of any obstacles between the devices hindering the radio signal
transmission: walls, inserted oors, large objects located within the room.
Check the signal level at the installation location
If the signal level is low (one bar), we cannot guarantee stable operation of the
security system. Take all possible measures to improve the quality of the signal!
As a minimum, move the device — even 20 cm shift can signi cantly improve
the quality of the reception.
